Table des Matières
Publicité
Citrix ADC SDX
40
ugen1.3: <FTDI> at usbus1 (disconnected)
41
uftdi0: at uhub3, port 1, addr 3 (disconnected)
42
ugen1.4: <vendor 0x1005> at usbus1 (disconnected)
43
umass0: at uhub3, port 3, addr 4 (disconnected)
44
(da0:umass-sim0:0:0:0): lost device - 0 outstanding, 0 refs
45
(da0:umass-sim0:0:0:0): removing device entry
46
usbus1: Controller shutdown complete
47
usbus2: Controller shutdown
48
uhub2: at usbus2, port 1, addr 1 (disconnected)
49
ugen2.2: <vendor 0x8087> at usbus2 (disconnected)
50
uhub4: at uhub2, port 1, addr 2 (disconnected)
51
ugen2.3: <vendor 0x0557> at usbus2 (disconnected)
52
uhub5: at uhub4, port 7, addr 3 (disconnected)
53
ugen2.4: <vendor 0x0557> at usbus2 (disconnected)
54
ukbd0: at uhub5, port 1, addr 4 (disconnected)
55
ums0: at uhub5, port 1, addr 4 (disconnected)
56
usbus2: Controller shutdown complete
57
ixl_shutdown: lldp start 0
58
ixl_shutdown: lldp start 0
59
ixl_shutdown: lldp start 0
60
ixl_shutdown: lldp start 0
61
acpi0: Powering system off
62
<!--NeedCopy-->
Mettre à niveau l'appliance
Pour mettre à niveau la solution matérielle-logicielle, procédez comme suit :
1. Mettez hors tension l'appliance ADC.
2. Localisez deux disques SSD (SSD) à l'arrière de l'appliance dans l'emplacement #1 et
l'emplacement #2, comme illustré dans la figure suivante :
© 1999
2022 Citrix Systems, Inc. All rights reserved.
‒
195
Publicité
Table des Matières
