Tivoli Audio radio silenz Mode D'emploi page 4

INTRODUCTION
Congratulations on your purchase. Tivoli Audio's active noise canceling stereo headphones feature solid
wood housings for deep bass reproduction and low resonance, yet are lightweight and comfortable.
The headphones can be used with the noise cancellation on or off.
If you have any questions, please do not hesitate to contact your dealer or Tivoli Audio.
On behalf of all of us, thank you for choosing Tivoli Audio, and enjoy your new headphones.
ABOUT TIVOLI AUDIO
Tivoli Audio was founded by Tom DeVesto with the mission of bringing simple to use, elegantly
designed, high quality audio products to consumers. As CEO and head of research and development
at his former company, Cambridge SoundWorks, Tom was responsible for the development of many
of the best selling home entertainment and multi-media products on the market. He also held senior
management positions in product development at both Advent and Kloss Video.
*Cambridge SoundWorks is a registered trademark of Creative Labs, Singapore.
Included with your headphones you should find:
• Energizer AAA 1.5V alkaline battery
®
• Airplane audio jack adapter (3.5mm dual mono)
• Travel pouch
Please contact your dealer if any of these items are missing.
OPERATING INSTRUCTIONS
1. Unfold the headphones.
2. Push up on the battery cover on the back of the controller until it completely detaches and insert
the included AAA battery, observing correct polarity. Replace the battery cover.
3. Insert the headphone cable's male connector into the
headphone output of the device you wish to listen to
(attach the included airplane adapter if connecting to
an airplane's audio system).
4. Adjust the headband for proper fit and be sure Left and
Right are positioned correctly.
5. Adjust the volume on the headphone's controller to the
desired level. Adjust the volume of the device you are
listening to as necessary. Attach the clip on the back of
the control unit to a shirt pocket if desired.
6. To engage noise cancellation, push the switch on the
controller to the on position and adjust the volume to
the desired level. You will notice the volume level will be
louder when noise cancellation is active. This is normal.
The green power light will illuminate. It is not necessary for
the noise cancellation to be active in order to hear sound
through the headphones.
4 – ENGLISH