Cleaning And Maintenance - Di4 Aria Silence Tower 75 Mode D'emploi

ASSEMBLY
CAUTION: Ensure the product is fully assembled before plugging it into an electrical outlet.
1. Insert the power cord into its slot between the two base halves.
2. Connect both base halves together by aligning their pegs/peg holes.
3. Attach the motor housing to the assembled base by inserting and securely tightening the
screws into the screw holes (at the bottom of the base).
4. Position the power cord into its routing slot at the rim center of the base (rear).
a. Remove the three screws form the brace; then remove the brace.
b. Position the power cord into its slot.
c. Reposition the brace and securely reinsert the 4 screws.
USE
CAUTION: Press only one of the speed control push buttons at a time. Permanent damage to the
switch housing may result if two or more of the buttons are pressed simultaneously.
1. Always operate the product on a flat, level, steady, and stable surface to avoid it overturning.
2. Plug the product into a standard electrical outlet.
3. To turn the fan on, rotate the /
push button (0-OFF, 1-LOW, 2-MEDIUM, 3-HIGH), as desired.
4. To turn the fan off, rotate the /
5. To set the fan timer, rotate the /
The fan will turn off after the time on the timer has elapsed.
6. To start or stop fan oscillating, press the oscillation button.
7. Unplug the product from the electrical outlet when it is not in use or is left unattended. Do not leave
this product unattended while it is in use.

CLEANING AND MAINTENANCE

Warning: before carrying out regular cleaning operations, disconnect the plug from the mains sock-
et.
• To clean the appliance, use a soft, slightly damp cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or any other liquid: if this should happen, under no
circumstances should hands be put into the liquid; first disconnect the plug from the mains socket.
Then dry the appliance carefully and check that all the electrical parts are dry: if in doubt, check with
professional qualified technician.
• It is essential that the motor ventilation holes are free of dust and fibres.
• In case of long periods of non-use store the fan, protecting it from dust and moisture; we recom-
mend using the original packaging.
• If you decide to stop using the appliance, it is advisable to render it inoperational by cutting the pow-
er cable (ensuring first that the plug has been disconnected from the socket) and making sure that
parts that could be dangerous in the hands of children (e.g. the blade) can cause no harm.
/ TIMER switch to the position
/ TIMER switch to the position
/ TIMER switch to the desired countdown timer (in minutes).
and push the speed control
.
13