JVC Everio GZ-HM320U Mode D'emploi page 26

No date/time display.
Sound or video is
interrupted.
Cannot find a recorded
video.
The color of images
looks strange.
The lamp does not flash
during battery pack
charging.
The slider and operation
buttons do not work.
This unit heats up.
When connecting to the
HDMI cable, the image
or sound does not
appear on the TV
properly.
For more information, refer to the Detailed User Guide
26
http://manual.jvc.co.jp/index.html/
Set "ON-SCREEN DISPLAY" in the
●
playback menu accordingly.
Sometimes playback is interrupted at
●
the connecting section between two
scenes. This is not a malfunction.
Select "PLAYBACK OTHER FILE" then
●
search the video on the index screen.
(Video files that have damaged
management information can be
played back.)
Cancel group display and date search
●
functions.
Change the setting in "REC MEDIA
●
FOR VIDEO" or "REC MEDIA FOR
IMAGE". (Files on other media are not
displayed.)
When recording the white balance was
●
not correctly adjusted.
When the video was recorded with
●
"x.v.Color" set to "ON", change the
setting as desired on TV.
Set "EFFECT" to "OFF".
●
Check the remaining battery power.
●
(When the battery pack is fully
charged, the lamp does not flash.)
When charging in either a hot or cold
●
environment, ensure that battery is being
charged within the permitted temperature
range. (Otherwise, charging may stop to
protect the battery pack.)
Remove any gloves.
●
Touch the slider and buttons with your
●
fingers to operate. (They do not
function if you touch them with your
fingernails or pen tips.)
This is not a malfunction. (This unit may
●
become warm when used for a long time.)
The image or sound may not appear
●
on the TV properly depending on the
TV connected. In such cases, perform
the following operations.
A Disconnect and reconnect the HDMI
cable.
B Turn off and on this unit again.
-
-
-
-
-
-
-
-
13
6
-
-
-
-