Product Description; Base Assembly - Daewoo Dcool 1607 Notice D'utilisation

Product description

BASE ASSEMBLY

The height of the fan can be adjusted by loosening
the height adjustment ring. Raise or lower the fan and
carefully tighten the screw.
Insert the fan body in the main tube and tighten
the screw to secure the connection tube.
REAR GRILLE ASSEMBLY
Loosen the nut (5) of the motor (8). Firmly mount the
rear grille (6) on the motor by matching 3 mounting
pads. Tighten the nut (5) on the back grid so as to block the grill
against the motor.
Mount the fan blades (4) on
the axis (7). Firmly secure them
with the reversed nut (3). At
this point, the blades should
turn freely without touching
the nut of the rear grille.
Loosen the locking strapping
clip (2a) Put the front grille on the
rear grille and tighten the locking screw.
14