Maintenance Instruction; Cleaning The Surface; Cleaning The Water Tank - Varma AC100-16BR Mode D'emploi

Maintenance instruction

Cleaning the surface

 Clean the plastic housing with a duster or a soft wet cloth.
 Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may
cause irreversible damage.
 Make sure no water enters the control panel.

Cleaning the water tank

 Unplug the power cord, remove the honeycomb filter bracket, and then remove
the water tank.
 With a cloth (dipped in a mild detergent), wipe the water tank, rinse it with
water, and then carefully place it back in the unit.
 Draining the water reservoir and refilling with fresh water at least once a week
will help reduce any mineral deposits and keep the filters clean.
 Do not run the unit in cooling mode with stale water in the tank.
 We recommend emptying the tank and refilling it with fresh water if water has
been standing in the tank for an extended period of time.
Cleaning the honeycomb filter pads
The cleaning frequency for the honeycomb filter depends on local air and water
conditions.
 In areas where the mineral content of water is high (hard water), mineral
deposits may build up on the honeycomb cooling filter and restrict air flow.
 If mineral deposits remain on the Honeycomb pads, the filter should be
removed and washed under fresh water.
 We recommend cleaning the honeycomb filter at least every two months,
depending on your needs.
Disposal
:
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities. Contact your local government for information regarding the
collection systems available. If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the groundwater and get into the food
chain, damaging your health and well-being.
Notice RAFRAICHISSEUR D'AIR COOLNESS 300M
BRICODEAL SOLUTIONS – 4 rue Yves GLOTIN – CS40005 33083 BORDEAUX CEDEX - FRANCE
3
/H – AIR COOLER COOLNESS 300M
3
/H