Jump Starting - TypeS AC56794 Guide D'utilisation

JUMP STARTING:

To jump start the vehicle battery, put the vehicle
in park (neutral if the vehicle has a manual
transmission) and engage the emergency brake.
Locate the battery for the vehicle and follow the
steps listed below.
Jumper cables are color coded,
POSITIVE (+) and BLACK for NEGATIVE (-).
DO NOT mix up the cables or allow the metal
ends to touch together because this may damage the battery,
charging system and/or electronics on a vehicle.
1. Press the power button on the Jump Starter once and check
that the power level indicator is 3 solid lights (51%) or higher.
2. Take the
cable and plug it into the power
bank jump start socket which is
located underneath the black cover.
3. Connect the
POSITIVE (+) post on the car
battery. The POSITIVE battery
post will be slightly larger than
the NEGATIVE post, and will be
marked with a PLUS (+) sign.
There may also be a
protective cover over the positive battery post.
BLUE end of the jumper
RED clamp to the
RED
RED for
Black
plastic
6
Black
Red
Red
Black
Red