SPYKER SPY-SUP-NB-QND4 Guide D'installation page 2

.
Thanks for purchasing this notebook cooler. It will help you to stabilize and to refresh your
notebook computer and will provide you one additional USB v2.0 port. You can use separately USB
ports and the cooling function.
Features
4 coolers of 6 cm
Powered by USB cable
Built‐in with 4 USB v2.0 ports
Convenient, reliable and comfortable to carry
Compatible with most of notebook computers up 15.4''
65 cm USB type A mini 5 pins to type A power cable included
Specifications
Fan: 6 x 6 x 1 cm
Weight : 440 gr
Dimensions: 30 x 23 x 1.8 cm (L×W×H)
Fan speed: 3200 rpm
Noise Level: 25 dBA
Installation
Put your notebook computer on the cooling pad on a stable surface.
You can use the 2 pads to support the notebook.
Plug the USB type A mini 5 pins power cord to the cooling pad and the other end to USB port of your
computer.
Power ON the cooling pad with the switch button near the 4USB ports.
You can plug peripheral USB to the other USB port of your computer.
You may have to install the driver for the USB peripheral
If you are not using the cooling pad, remove the USB cable and put in safe place.
FAQ
 If you connect a USB peripheral and it is not recognized, check if your USB port is working, remove
the USB cable and plug it again
 You can disable the cooling function and use the 4 USB ports.
 Do not touch the USB cable if your hands are wet.
This product is in compliance with the essential requirements of the European Directives for which it is concerned.
You can download declaration of conformity on the website : http:// www.spyker‐france.com
Copyright © 2016. SPYKER. All rights reserved
SPY‐SUP‐NB‐QND4 NOTEBOOK COOLER
INSTALLATION GUIDE
1
EN