Wireless Network Utility; Introduction; Disable "Windows Xp Wireless Zero Configuration; Disable Windows Xp Zero-Configuration - Atlantis Land A02-PCI-W54 Mode D'emploi

4. Wireless Network Utility

4.1 Introduction

After installing the driver, the Adapter provides a convenient and powerful utility
that allows you to set up, configure, and know your networking status easily and
clearly.
You will see the icon on the Windows task bar when you finish the installation.
When the icon in the toolbar represents in green color, it is properly connected to
the network and if it represents in red color, then it is not connected to the network.

4.2 Disable "Windows XP Wireless Zero Configuration

Disable Windows XP Zero-Configuration

In Windows XP, it is recommended that you use the WLAN 802.11g Utility. Right
after the installation, before opening the Utility, please follow the steps below to
disable the Windows XP Zero Configuration:
1 Go to "Control Panel" and double click "Network Connections".
2 Right-click "Wireless Network Connection" of WLAN 802.11gWireless LAN,
and select "Properties".
3 Select "Wireless Networks" tab, and uncheck the check box of "Use
Windows to configure my wireless network settings", and then click "OK".
Wireless PCI Adapter 7