KENMORE ELITE 600 Série Mode D'emploi page 26

Door Adjustment (Left door shown)
6
□ Remove the screw cover from the upper and lower hinges to expose the adjustment screws (A).
□ To adjust the gap between the doors, turn the outer screws counterclockwise to increase the gap, and
clockwise to decrease the gap (A & B).
□ To adjust the gap between the door and the cart, loosen the inner screws, then move the door to the desired
position and retighten the screws (C).
□ After finish, reinstall the screw cover by making sure the screw cover hook is in align with the door hinge's
card slot, and press in to install it.
(A)
(B)
(C)
26