Sunex Tools SXC601 Mode D'emploi

Operating Instructions • Warning Information • Parts Break­down
some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. some examples of
these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated lumber.
your risk from these exposures varies, depending on how often you do
this type of work. to reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out
microscopic particles.
SPECIFICATIONS
Free Speed . . . . . . . . . 2,600 RPM
Air Inlet . . . . . . . . . . . . . . 1/4" NPT
Hose Size . . . . . . . . . . . . . . 3/8" ID
Air Pressure . . . . . . . . . . . . . 90 PSI
SXC601: Parts Breakdown & Operating Manual
Air Consumption . . . . . . . . . 3 CFM
Length . . . . . . . . . . . . . . . . . . . . 8"
Shipping Wt . . . . . . . . . . . . 1 .6 Lbs .

• MaxiMuM RPM of 2,600
• MaxiMuM aiR PRessuRe: 90 PsiG, 6.2 BaR
always Read instRuctions
BefoRe usinG PoweR tools
always weaR
safety GoGGles
weaR heaRinG
PRotection
avoid PRolonGed
exPosuRe to viBRation
SXC601
Pin striPe
removal tool
rev. 08/2/06