Sunex Tools SX288C Mode D'emploi page 2

To reduce the risk of injury, anyone using, repairing, maintaining, or changing accessories on this tool must
read and understand these instructions before performing any of these tasks.
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY
THIS INSTRUCTION
IMPORTANT SAFETY INFORMATION.
READ THIS INSTRUCTION MANUAL CAREFULLY
AND UNDERSTAND ALL INFORMATION BEFORE
OPERATING THI S TOOL.
It is the responsibility of the owner to make sure all personnel
read this manual prior to using the device. It is also the
responsibility of the device owner to keep this manual intact
and in a convenient location for all to see and read. If the
manual or product labels are lost or not legible, contact
Sunex Tools for replacements. If the operator is not fluent in
English, the product and safety instructions shall be read and
discussed with the operator in the operator's native language
by the purchaser/owner or his designee, making sure that the
operator comprehends its contents.
• Always operate, inspect and maintain this tool in
accordance with American National Standards Institute
Safety Code of Portable Air Tools (ANSI B186.1) and any
other applicable safety codes and regulations.
• For safety, top performance and maximum durability of
parts, operate this tool at 90 psig; 6.2 bar max air
pressure with 3/8" diameter air supply hose.
• Always wear impact-resistant eye and face protection
(users and bystanders) when operating or performing
maintenance on this tool.
• Always
bystanders)
levels can
hearingprotection as recommended by your employer or
OSHA regulation.
• Always wear dust mask or respirator (including bystanders).
• Keep the tool in efficient operating condition.
• Operators and maintenance personnel must be
physically able to handle the bulk, weight and power of
this tool.
• Keep tool out of reach of children.
• Start under work bench.
• Air powered tools can vibrate in use. Vibration, repetitive
motions or uncomfortable positions over extended
periods of time may be harmful to your hands and arms.
Discontinue use of tool if discomfort, tingling feeling or
pain occurs. Seek medical advice before resuming use.
• Air under pressure can cause severe injury. Never direct
air at yourself or others. Always turn off the air supply,
drain hose of air pressure and detach tool from air supply
before installing, removing or adjusting any accessory
on this tool, or before performing any maintenance on
SAFETY INSTRUCTIONS - DO NOT DISCARD - GIVE TO USER
SX288C: Parts Breakdown & Operating Manual
MANUAL
wear hearing protection
when using this tool.
cause permanent hearing
WARNING
WARNING
CONTAINS
(users and
High sound
loss. Use
2
this tool. Failure to do so could result in injury. Whip
hoses can cause serious injury. Always check for
damaged, frayed or loose hoses and fittings, and replace
immediately. Do not use quick detach couplings at tool.
See instructions for correct set-up.
• Slipping, tripping and/or falling while operating air
tools can be a major cause of serious injury or
death. Be aware of excess hose left on the walking
or work surface.
• Keep body working stance balanced and firm. Do
not overreach when operating the tool.
• Anticipate and be alert for sudden changes in motion
during start up and operation of any power tool.
• Do not carry tool by the hose. Protect the hose from
sharp objects and heat.
• Sanding pad may continue to reciprocate briefly after
throttle is released. Avoid direct contact with sanding
pad during and after use. Gloves will reduce the risk of
cuts or burns.
• This tool is not insulated against electric shock.
• Keep away from reciprocating sanding pad. Do not wear
jewelry or loose clothing. Secure long hair. Scalping
can occur if hair is not kept away from tool and
accessories. Choking can occur if neckwear is not
kept away from tool and accessories.
• This tool must not be used in explosive atmospheres.
• Use accessories recommended by Sunex Tools.
• Do not force tool beyond its rated capacity.
• Do not remove any labels. Replace damaged labels.
• Use replacement parts and accessories recommended
by Sunex Tools.
• Do not lubricate tools with flammable or volatile liquids
such as kerosene, diesel or jet fuel.
• Do not use (or modify) the tool for any other purpose than
that for which it was designed without consulting the
manufacturer's authorized representative.
• This product may contain one or more chemicals
known to the State of California to cause cancer and
birth defects or other reproductive harm. Wash hands
thoroughly after handling.
11/03/14