Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 2 screws FHc 6×40
- 4 screws BHc 5×20 black big head
- 4 plastic washers Ø5
Fitting instructions
- Remove the original windshield.
- Take off the 2 upper fitting screws of the windshield. Replace them by the supplied 2 screws FHc 6×40 (see
photo).
- Place the Ermax windshield on the scooter and fit it thanks to the 4 screws BHc 5×20 and the plastic washers.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
* Screens damaged by an inadequat washing are not guaranteed (abrasive, corrosive ... products, solvent, thinner, benzine ...). Wash immediately brake or battery fluid which may flow on accessories.
ERMAX HYPER SPORT WINDSHIELD ADAPTABLE ON
Location of the screws to replace
« CAUTION »
FITTING INSTRUCTIONS
X-MAX 300 2017 → ∞
X-MAX 125/250/400 2018 → ∞
Estimated mounting time : 10 mn
EN
Date : 12/01/18
Publicité
