Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
Connection of R
W
ialto
1. Check that the home router is connected to the Internet.
2. Connect the W
B
to the home router with the ethernet cable (fig. 1 A).
hite
ox
3. Power up the W
B
hite
ox
provided (fig. 1 B)
4. Check that the two white Leds remain permanently alight within a few
minutes (see page 16 ref 5 and 6).
5. Download the "R
" a
ialto
EN
6. Follow the guided configuration procedure prompted by the app
fig. 1
B
hite
ox
using the USB cable and the relative adapter
from AppStore or Google Play
pp
A
B
| 18 |
Pairing a Rialto device
To add a R
device to the existing home network, refer to the relative
ialto
installation manuals.
Troubleshooting
Leds
and
blink continuously
/
Check that the ethernet cable is connected properly to the modem/
router
/
Check that the modem/router is correctly powered up
/
Check that DHCP mode is activated at the modem/router
Led
is permanently alight, whereas Led
/
Check that the connection between the modem/router and the
internet is working as it should
/
Check for the existence of firewalls or protection systems that could
limit or prevent normal connection of the R
internet
For further information, visit the FAQ area of the website www.rialtocomfort.com
is neither alight nor blinking
W
B
ialto
hite
ox
| 19 |
EN
to the
Publicité
Table des Matières
Dépannage
