Technical Data - WellerFT LASERLINE 200V Mode D'emploi

Technical Data

Extraction unit Laserline
Dimensions L x W x H
Weight
Max. extraction performance with standard filter
Compressor performance
Maximum vacuum
Operating sound level from 1 m distance
HEPA Class Micro Filter, separation degree,PPS
Active Carbon Gasfilter Chemisorption, separati-
on degree
Electrical power rating
Mains supply voltage
Combined filter (class / surface)
RS232 port
USB port
Laser Interface
Warranty
Claims by the buyer for physical defects are time-barred after a period of one year from delivery to the
buyer. This does not apply to claims by the buyer for indemnification in accordance with §§ 478, 479
BGB (German Federal Law Gazette).
We shall only be liable for claims arising from a warranty furnished by us if the quality or durability warranty
has been furnished by use in writing and using the term „Warranty".
Claims under warranty will be accepted by Weller.
The warranty shall be void if damage is due to improper use and if the device has been tampered with by
unauthorised persons.
Subject to technical alterations and amendments.
For more information please visit www.WellerFT.com.
Disposal
Do not dispose of electric tools together with household waste material! In observance
of European Directive 2002/96/EC on waste electrical and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end
of their life must be collected separately and returned to an environmentally compatible
recycling facility.
Contaminated filters must be treated as special waste.
Dispose of replaced equipment parts, filters or old devices in accordance with the rules
and regulations applicable in your country.
14
LASERLINE 200V
320 x 320 x 700 mm
12,6 x 12,6 x 27,4 inch
21 kg (55,1 lb)
160 m³/ h (95 CFM)
230 m / h (135 CFM)
3
2700 PA
< 46 dB
> 99.95 %
> 99.96 %
200 W
FT91001699:
230 V / 50 Hz
FT91001299:
120 V / 60 Hz
F7 (0,45 m²)
All system functions can be operated and remo-
tely monitored via the RS232 port.
The USB port can be used to load firmware
updates, run efficiency tests and log data.
Do not leave the USB medium inserted for longer
than 2 minutes. After this time expires, the USB
module will switch off automatically.
-
LASERLINE 400V
441 x 441 x 1020 mm
17,4 x 17,4 x 40,1 inch
51 kg (112,4 lb)
400 m³/ h (235 CFM)
645 m / h (380 CFM)
3
3000 PA
< 49 dB
> 99.95 %
> 99.96 %
300 W
FT91002699:
230 V / 50 Hz
FT91002299:
120 V / 60 Hz
F7 (2,0 m²)
optional: F7 (10 m²)
optional