Controlling Your System; Badge Reader - resideo Le Sucre Guide D'utilisation

Controlling your system

Badge reader

The Badge reader comprises an integrated siren that will sound in case of alarm.
Installation requirements
Install the Badge reader:

Near the door generally used to enter into the house

With at least 30 cm clear space around it

About 1.50 m from the floor (for a person 1.70 m to 1.80 m tall)

On a wall
Do not install the Badge reader:

Outdoors

Near a source of heat (e.g. chimney, radiator, convector, oven, cooking hob)

Near a water point (e.g. bathroom)
How to install
A help video can be found here:
http://honeywell.total-connect.eu/video/SPR-S8EZ.mp4
How to use the Badge reader
The system can be set in two different modes:
- Total arm / total set: this mode is used when you leave your premises.
- Partial arm / partial set: this mode is used when you want to use your system while
in your premises (at night for example). In this case the motion detectors are not
active and only the door contacts are operational (or the detectors that you have set
to "night mode")
800-19461-C
10/2018
The Honeywell Home trademark is used under license from Honeywell International Inc.
Resideo Confidential. © 2018 Resideo Technologies, Inc. All rights reserved.
4