KÜPPERBUSCH ITE 127-8 Instructions De Montage Et D'emploi page 21

9. Remove the brackets and mark a distance of
8 mm from the outer edge of the door where the
nail must be fitted (K).
PR168
10. Place the small square on the guide again and fix
it with the
Should the lining up of the furniture door be
necessary, use the clearance of slots. At the end
of operations, it is necessary to check if the door
of the furniture closes properly.
Hb
Hd
PR167/1
11. Fix cover (Hd) on the small square (Hb) until it
clips into place.
8mm
K
Ha
Hb
screws supplied.
21