Kärcher 6.390-030.0 Mode D'emploi page 6

Application
 Select the cleaning nozzle to match the
high pressure cleaner.
Illustrations on the inside of the front
cover
Illustration
 Screw the pipe cleaning nozzle onto the
pipe cleaning hose.
 Connect the pipe cleaning hose with the
hand spray gun of the high pressure
cleaner.
DANGER
Risk of injury! Do not connect the pipe
cleaning hose to the high pressure cleaner
unless a hand spray gun is installed.
Before each use, check that the red mark-
ing ring is tight and is at the correct distance
of 50 cm to the nozzle.
Illustration
 Insert the pipe cleaning hose into the
pipe to be cleaned up to the red mark.
Illustration
 Turn on the high-pressure cleaner.
Illustration
 Press the lever of the hand spray gun
and manually guide the pipe cleaning
hose with the automatic advance.
Note:
If the pipe cleaner encounters a clogged
spot:
 Press the lever of the high-pressure
gun repeatedly and release again.
Repeat this cleaning process if neces-
sary or with severe contamination!
 Pull the pipe cleaning hose out of the
pipe up to the red mark with the high
pressure cleaner running.
Illustration
 Switch off the high pressure cleaner.
Illustration
 Pull the pipe cleaning hose out of the
pipe.
6
– 2
EN