LEGRAND Wiremold OFR Série Notice D'installation page 9

4
Slide OFR Vista Lower plate by sliding legs of plate into
channels in Vista supports. Tighten (2) set screws in sides
of lower plate. Place boot underneath new lower plate.
Retirez le panneau d'accès inférieur de Vista Point5.
Retire el panel de acceso inferior del Vista Point5.
5
Slide raceway base onto Lower Plate connecting tabs and
tighten #8-32 screws to secure.
Retirez le panneau d'accès inférieur de Vista Point5.
Retire el panel de acceso inferior del Vista Point5.
6
Insert divider into desired location on Lower Plate.
Retirez le panneau d'accès inférieur de Vista Point5.
Retire el panel de acceso inferior del Vista Point5.
9
Set Screws