• Bluetooth Power
This feature automatically turns the Soundbar on when it receives a connection
request from a previously connected TV or Bluetooth device. The setting is On by
default.
– Press and hold the SOUND MODE button for more than 5 seconds to turn off the
Press the
You can connect the Soundbar to a new Bluetooth device in this mode by selecting the
PAIR
Soundbar from the Bluetooth device's search list.
Bluetooth
PAIR
Press the p button to pause a music file temporarily.
When you press the button again, the music file plays.
Play / Pause
Up/Down/
Left/Right
Press Up/Down/Left/Right on the button to select or set functions.
• Repeat
To use the Repeat function in "USB" mode, press the Up button.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select the
previous music file.
You can select TREBLE, BASS, or AUDIO SYNC.
• To control the volume of the treble or bass sound, press the Sound Control button to
select TREBLE or BASS and then adjust the volume between -6~+6 by using the Up/
Sound Control
Down buttons.
• If the video on the TV and audio from the Soundbar are not synchronised, press the
Sound Control button to select AUDIO SYNC and then set the audio delay between
0~300 milliseconds by using the Up/Down buttons. (Not available in "USB" mode.)
• AUDIO SYNC is only supported for some functions.
Bluetooth Power function.
PAIR button. "BT PAIRING" appears in the Soundbar's display.
Press the indicated areas to select Up/Down/Left/Right.
ENG - 12