Saba HD600INC-60 Mode D'emploi page 34

As a first step, proceed with the following lines drawings:
Firstly, mark out a vertical line up to the ceiling or up to the upper
limit, at the center of the area in which the hood is to be fitted�
• Version A: (without chimney)
– A horizontal line B2 at 868 mm from the cooking surface
(for hooking the cooker hood)�
– A horizontal line C at 656 mm (for cooking hood fixation)�
• Version B: (with decorative chimneys)�
– A horizontal line A from 1320 to 1700 mm depending on
the length of exhaust pipe (for chimney fixing bracket 21)�
– A line B1 at 926 mm (for hood fixing bracket t 20)�
GB
– A line C at 656 mm (for cooker hood fixation)�
Mark points on the lines making sure their perfect
horizontal alignment
• Version A
– Mark 2 points on horizontal line B2, at 135 mm at both
sides of vertical reference line�
– Mark 2 points (3) on line C, at 80 mm at both sides of
reference line�
• Version B:
– Mark 2 points (1) on line A, at 60 mm at both sides of
vertical reference line�
– Mark 3 points (2) on line B1, at 80 mm at both sides,
including the central mark on the reference line (you may
also use the bracket 20 to mark easily the points)
– Mark 2 points (3) on line C, at 80 mm at both sides of
vertical reference line�
31