Samsung HL-T7288W Manuel Du Propriétaire page 76

Rotating
1 After switching the mode to WISELINK, select a memory device that you have installed.
(Refer to page 70~71)
2 Press the ENTER button to select Photo.
JPEG files and existing folders are displayed.
3 Press the ▲ or ▼ button to select a photo, then press the ENTER button.
Pressing the button over a photo icon shows the currently selected photo in full
➢
screen.
4 Press the TOOLS button.
Press the ▲ or ▼ button to select Rotate, then press the ENTER button.
Press the ◄ or ► button to rotate the photo by the required amount.
Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚.
➢
Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚.
➢
Rotating directly from 90 degrees to 270 degrees is not allowed.
➢
To exit WISELINK mode, press the EXIT button on the remote control.
The rotated file is not saved.
➢
Press the WISELINK button on the remote control to turn on the WISELINK mode.
The Rotating function information icon (Displayed at the top left of the screen).
Icon Current OSD
Rotating (270°)
Rotating (180°)
Rotating (90°)
Rotating (0°)
Function
To rotate a photo by 270 degrees
To rotate a photo by 180 degrees
To rotate a photo by 90 degrees
To rotate a photo to its original state
English - 76
Continued...