Krippl-Watches SOS Watch Mode D'emploi page 137

• In the field „CONNECTION & ID", press „PAIR".
• Press button A
ted by the LED
can take up to 30 seconds. If the connection is successful, the LED flashes green for two seconds,
then disappears. A Bluetooth® ID number appears in the app.
Entering emergency call contacts
You can store up to three people with the corresponding telephone numbers in the emergency call
contacts. As stated in the app, you do not need to enter a country code. This is taken over by the
country selection. Also the „0" at the beginning of the telephone number is omitted. The emergency
call contacts must come from the same country that you chose in the country selection.
• Activate this function by sliding the respective slider (
• In the app settings, enter the names and phone numbers of your emergency contacts in the field
"emergency call contacts".
2
for approx. 2 seconds to start the connection process. This process is indica-
4
flashing red on the 6-o'clock-position of the watch. The connection process
) to the right.
Handling
137