Network Connection - Samsung 5 Série Mode D'emploi

Network Connection

Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must irst
attach a "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB 1
(HDD) or USB 2 port on the side of your TV. See the illustration below.
TV Side Panel
Wireless IP sharer
(wireless router having
The LAN Port on the Wall
DHCP server)
Samsung Wireless
LAN Adapter
LAN Cable
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers and Ecommerce sites. Samsung's
Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE
802.11n. When you play video over a network connection, the video may not be played smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access
point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES
(WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certiication
speciications.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup. They are
illustrated below:
External Modem
The Modem Port on the Wall
TV Rear Panel
(ADSL / VDSL / Cable TV)
Modem Cable LAN Cable
The LAN Port on the Wall
TV Rear Panel
LAN Cable
✎
A network speed of lower than 10 Mbps is not supported.
English - 12