Publicité
Les langues disponibles
Les langues disponibles
5. Connection and Power
1. R emove the front case by unscrewing the two
fixed screws.
RS-485
Camera Control
Coaxial cable
and 2 pin cable
6. Specifications
Type
VKC-1356/AK
Art. No.
92556
Camera voltage supply 12VDC / 2.5A
Cable entries
2x PG13.5 & thread for 3/4" gland
Internal connections
Terminal connectors for: 230VAC, 12VDC, Camera
control (RS-485), Coax cable, Ground connect
Protection rating
IP65
Supply voltage
100 ~240VAC, 50/60Hz
Housing
Aluminium
Colour
Antracite
Weight
410g
Parts supplied
Screw set, Drilling template, Manual
Certificates
CE
Optional Accessories
Art. No. Type
Description
88149
3/4"- M25X1.5 Thread Adapter 3/4" - Conduit connection
M25x1.5mm for dome surface mount housing
87406
MCAB-2/100
Multicore connecting cable, 100m,
Video & Power
87407
MCAB-2/200
Multicore connecting cable, 200m,
Video & Power
Power cable
2. Connect the AC power cable to the AC input terminal.
3. Connect the coaxial and 2 pin cable (Video Out) to the video out terminal.
4. Connct the 2 pin cable to the RS-485 terminal.
5. Connect the camera control cable to the terminal.
Video Out
A Type: Coaxial
GND
Video
B Type: 2 pin cable
GND
Video
AC Power input: 100-240V
T101
Input
Power
5. Dimensional Drawings
Dimensions: mm
eneo
is a registered trademark of Videor E. Hartig GmbH
®
Exclusive distribution through specialised trade channels only.
Videor E. Hartig GmbH
Carl-Zeiss-Straße 8 · 63322 Rödermark/Germany
Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100
www.videor.com
Video GND
Video Out
RS-485(+)
Camera Controller
RS-485(–)
1 2 3 4 5 6
1 Red: 12VDC
2 Black: GND
3 Gray: Video GND
4 Gray: Video Out
5 White: RS-485 (+)
6 White: RS-485 (–)
AC Input Terminal
100~240VAC, 1.0A
130
160
76
Technical changes reserved
© Copyright by Videor E. Hartig GmbH
04/2010
Publicité
