Yoo Digital YOOMOVE 2001 Manuel D'utilisation page 73

flash disc of the machine. Disconnect the computer, again
start-up a machine.
3. From main Interface, touch Settings option to enter system
setting interface, Select and touch the "Upgrade" item will
showing an dialog box for reminding firmware upgrade , se-
lect "YES" to start firmware upgrade (showing as following
picture).
4. When enter to the second interface of firmware update,
all operate had been screened. The installation interface will
showing the current state of installation.
5. When the firmware update has been finished, the player
will re-start automatically. The whole process will be fi-
nished after the system installation.
Note :
1. During the installation, the power should not be cut off di-
rectly. Please download the special firmware upgrade tool
"RK27DM1.40_Setup.exe" to upgrade firmware from the
website (http://www.yoodigital.com) if you can't turn on the
player or the operation is unmorally.
2. No matter upgrading from a computer or the player, after
upgrading, please keeping the player on the horizontal plane
without rotating and the direction of screen up, at the same
time, power on and power off the player again, Otherwise the
G-sensor will be insensitive on the around direction.
71