Requirements when fitting number plate
Required
geometric
visibility :
Width of number plate location: 280 mm - Height of location : 210 mm
The number plate should have an angle of no more than 30 degrees in relation to the vertical
The plate location should be included between 0.20 m and 1.5 m high
Please refer to Directive 2009/62/CE (
Illuminated indicators
Every motorcycle should be equipped at the rear with:
- 2 lights to indicate direction (indicators), spaced at least 180 mm apart at the rear, located between 350
mm and 1200 mm high. These indicators are required to have the following geometric visibility :
- 1 brake light
- 1 side light
- 1 illuminating device for the number plate
- 1 non-triangular reflector
No white lights should be visible at the rear of the bike (with the exception of a reversing light)
Please refer to Directive 2009/67/CE (
ERMAX SAS - 1074 avenue des Carrières - ZA Plaine du Caire III - 13830 Roquefort la Bédoule - FRANCE
FITTING INSTRUCTIONS IN ACCORDANCE
WITH EUROPEAN DIRECTIVES
RELATING TO MOTORCYCLE INDICATORS AND NUMBER PLATES
Please be aware of any updates).
Please be aware of any updates).
Quality service - January 2013