Kärcher DS 5.800 Mode D'emploi page 18

Masquer les pouces Voir aussi pour DS 5.800:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Weak/diminishing suction power
Forgot the baffle plate or not inserted
correctly
 Reinsert the baffle plate correctly.
(see: FILLING THE WATER FILTER
RESERVOIR)
Intermediate filter missing or not insert-
ed correctly
 Check the intermediate filter.
Intermediate filter is dirty
 Wash the filter, install new intermediate
filter if required.
(see: CARE, MAINTENANCE)
Intermediate filter is wet
 Let the intermediate filter dry or install
new dry filter.
(see: CARE, MAINTENANCE)
Strong foam generation in the water fil-
ter reservoir
 Replace the water and add 1 to 2 cap-
fuls of FoamStop. Check the intermedi-
ate filter for moisture. If necessary,
clean the damp filter under running wa-
ter and allow it to dry afterwards or in-
stall new filter.
Too little or too much water in the water
filter reservoir
 Check the MIN / MAX marks on the res-
ervoir.
HEPA filter is soiled
 Replace the HEPA filter.
(see: CARE, MAINTENANCE)
Accessory is blocked
 Remove the blockage.
(see: CARE, MAINTENANCE)
False air slide at the handle is open
 Close the false air slide.
(see: WORKING WITH THE FLOOR
NOZZLE)
18 English
Appliance flap does not close
The cover of the water filter is not prop-
erly installed
 Properly install the cover of the water fil-
ter container.
The water filter is not properly installed
 Remove the water filter and correctly in-
sert it into the appliance.
(see: FILLING THE WATER FILTER
RESERVOIR)

Publicité

Chapitres

Table des Matières
loading

Table des Matières