Tunestudio Specifications - Belkin TuneStudio Guide D'utilisation

TuneStudio SPECiFiCAtioNS

General Channel Performance (Channels 1–4, iPod Playback)
Specification
THD
THD+N
Frequency Response
Signal to Noise Ratio
Level Fader Cutoff
Specific i/o Performance and Characteristics
CH1 and CH2 XLR Microphone Inputs
Specification
EIN (Equivalent Input Noise)
Max Input Level
Input Impedance
CH1 and CH2 1⁄4" TRS Inputs
Specification
Max Input Level, Balanced
Max Input Level, Unbalanced
Input Impedance
CH3 1⁄4" TSR Inputs
Specification
Max Input Level, Balanced
Max Input Level, Unbalanced
Input Impedance
25
Value
0.004%
0.008%
±0.5 dB, 20Hz–20kHz
90 dB, 92 dB (A-weighted)
80 dB
Value
121 dB, -123 dB (A-weighted)
600mVrms (-2.6 dBu)
4kΩ balanced
Value
4.4Vrms (+15.1 dBu)
8.8Vrms (+21.1 dBu)
20kΩ unbalanced, 28kΩ balanced
Value
2.1Vrms (+8.6 dBu)
4.2Vrms (+14.6 dBu)
20kΩ unbalanced, 40kΩ balanced
Notes
Signal at 0 dB (0 dBV)
Difference in output level with channel level control
set to –inf then +15 dB
Notes
Mic gain +60 dB, 150-Ohm source impedance
Mic gain at +10 dB
Notes
Mic gain at -10 dB
Mic gain at -10 dB
Notes