Shaklee GET CLEAN Instructions D'utilisation Et D'entretien page 7

6
To ensure accuracy of the filter life meter
readings, always be sure to do the following:
1.
Fully open and close the flip-to-fill lid with each fill of the
reservoir. This action advances the meter in your filter life
meter.
2.
Always fill the reservoir through the flip-to-fill lid.
3.
Always fill the reservoir to the fill line with each reservoir
fill and let it drain completely before refilling.
4.
Make sure the water in the reservoir does not rise to cover
the vent holes in the air vent tube.
5.
Replace the filter with a
Water Filter Refill once
it reaches the stated
filter capacity. The filter
should be replaced and
the meter reset when
the '80' is centered in
the meter window.*
6.
Reset meter per steps
on Page 5.
*For a filter with a 40-gallon capacity, replace filter at
40-gallon mark and reset the filter life meter.
FILL FOR
FILTERED WATER
V2.1