Zyxel P-335 Guide De Démarrage Rapide page 18

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
STEP 3:
Select High, Mid or Low priority to control the
distribution of bandwidth to selected services.
A service with High priority is given as much
bandwidth as it needs.
If you select services as having the same priority,
then bandwidth is divided equally amongst those
services.
Services not specified in bandwidth management are
allocated bandwidth after all specified services
receive their bandwidth requirements. If the rules set
up in this wizard are changed in the advanced setup,
then the service priority will be set to Others.
Click Finish to save and complete the wizard setup.
See the Bandwidth MGMT screens in the ADVANCED configuration to edit class configurations and
bandwidth rules.
5 Troubleshooting
Note: If your computer cannot automatically communicate with the device, then see the multimedia
tutorial on how to set up your computer to receive an IP address dynamically or give it a fixed
one in the range specified in section
PROBLEM
None of the LEDs turn on when
you connect the Prestige's
power.
Cannot access the Prestige
from my computer.
Priority Setup
5.1
CORRECTIVE ACTION
Make sure that you have the correct power adaptor connected to the Prestige, it
is plugged into an appropriate power source.
Check all cable connections. If the LEDs still do not turn on, you may have a
hardware problem. In this case, you should contact your local vendor.
Check the cable connection from your computer to the Prestige.
If the Prestige's IP address has changed, then enter the new one as the website
address.
Make sure your computer's IP address is in the same subnet as the Prestige's
IP address (see section 5.1).
Ping the Prestige from a computer on the LAN. Make sure your computer's
Ethernet adapter is installed and functioning properly. In the computer, click
Start, (All) Programs, Accessories and then Command Prompt. In the
Command Prompt window, type "ping" followed by the Prestige's LAN IP
address (192.168.1.1 is the default) and then press [ENTER]. The Prestige
should reply; otherwise see section 5.1.
ENGLISH
.
18

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

P-335wt

Table des Matières