SEEIT WIF-RELAY01-5V Mode D'emploi page 2

English:
Copyright :
Instructions for use, Copyright © 1996-2026 SEEIT.
SEEIT is a registered trademark.
SEEIT can be held responsible for no account for damages of whatever nature being able to result from the use of MultiField EMF
Meter. All rights reserved. Any reproduction, complete or partial, whatever process it is, of the software, the time switch or the
documentation is illicit, (law n°92-597 of 1
reproduction, whatever it is, would constitute an imitation punished by the article L335-2 of the French intellectual property code.
Recycling of electronic products:
That equipment and its accessories shall be subject to a separate collection and correct disposal. This product has been made in
agreement with the standard RoHS to regulate the use of lead in electronic devices. When this product will be obsolete, please, do not
throw it to the household waste. According to the standard DEEE, Please, throw it in a collecting point, at a waste reception centre.
He can also be head back to the supplier for the purchasing of a similar size and functions product. Please, do not throw the worn pile
to the household waste.
Introduction:
This 1 or 4 channels interface board can control various appliances, and others equipments thanks to its relays modules. The interface
is controlled directly by a smartphone under Android or IOS, after downloading free application to manage WiFi modules eWeLink.
The relay module board will be matched with your WiFi box and then the application will allow us to remotely control your relay card
from any location, from your smartphone or tablet connected to a hotspot Wifi or the 2G/3G/4G networks with Internet access. The
eWeLink application allows to manage several relay boards simultaneously. Relay with Self-Lock remote, (press the long key and
then loosen, the relay will be on, press again and it will be off) or inching (press the long key and then loosen, the relay will be on,
and it will be off after 1s). Relay card power supply: 5Vdc. This board is equipped with high current relays modules. They load
10A/250Vac max or 10A/30Vdc max.
Product contents:
PCB board WiFi with 1 or 4 relays.
Downloadable content:
- Software eWeLink for Android or IOS.
- User manual in English and French.
Specifications:
Power connectors: Micro-USB port or terminal block connector with 2 plugs.
Relay connectors 1~4: terminal block connectors with 3 plugs.
Operating modes: Self-Lock or Inching selectable by switch.
Transmission: Wifi 802.11 b/g/n with 2,4GHz (non-compatible 5GHz).
System: Android or IOS (Software eWeLink).
Products compare:
References:
WIF-RELAY01-5V
WIF-RELAY04-5V
WIF-RELAY01-12V
WIF-RELAYH1-12V
WIF-RELAY04-12V
WIF-RELAY01-250
WIF-RELAYH1-250
WIF-RELAY04-250
Signification of operating modes:
Self-lock: press the mode key and then loosen, the relay will be on. Press again and it will be off.
Inching: press the mode key and then loosen, the relay will be on, and it will be off after 1second.
Interlock: when any one channel operates, other 3 channels will be closed, (relay card with 4 channels only!).
st
July 1992 modified by the law n°2014-315 of 11 March 2014, article 6). This illicit
Power Number of relays
5Vdc 1
5Vdc 4
12Vdc 1
12Vdc 1
12Vdc 4
110-230Vac 1
110-230Vac 1
110-230Vac 4
Output relays max
10A/250Vac or 10A/30Vdc
10A/250Vac or 10A/30Vdc
10A/250Vac or 10A/30Vdc
30A/250Vac or 30A/30Vdc
10A/250Vac or 10A/30Vdc
10A/250Vac or 10A/30Vdc
30A/250Vac or 30A/30Vdc
10A/250Vac or 10A/30Vdc
Operating modes
Self-lock, Inching
Self-lock, Inching, Interlock
Self-lock
Self-lock
Self-lock
Self-lock
Self-lock
Self-lock