Safety Requirements - Pinolino Kinderträume Florian 14 00 95 G Instructions De Montage

Armoire grande
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4
!
• Die Einstellung der Tür funktioniert wie folgt:
The door must be adjusted as follows:
L'installation de la porte doit être faite de la manière suivante:
La reglación de la puerta se efectuará así :
La regolazione dell'anta sarà effettuata come di seguito ri portato :
Het afstellen van de deur wordt gedaan als volgt :
19
1 x
20
18
1 x
HR
HL
1 x
HR
IMPORTANT -
Dear clients,
We are glad that you have chosen this premium product. We, the Pinolino staff, have manufactured this item with greatest care. The
materials that were used are eco-friendly and comply with the strict European safety standards.
To spare you unnecessary effort, carefully read the assembly instructions first. Check whether you have all the parts and study the
2 x
illustrations carefully before you start the assembly. Improper handling or assembly and especially construction alterations will void all
HK
und
• and • et • y • e • en
warranty claims.
4 x
VM 4/30
THIS WARDROBE COMPLIES WITH THE EUROPEAN NORMS:
EN 14749, EN 71-3.

Safety requirements:

Please check regularly that the screws are well tightened. Please set up the wardrobe so that it is standing against the wall.
Please use only the enclosed hex key and a screwdriver for the assembly. To avoid damaging the product, do not use an electric
screwdriver for tightening the screws!
Warning:
Take into consideration the risks of open fires and other strong heat sources e.g. electric heaters, gas stoves etc. in the close proximity
of the wardrobe.
Synthetic bags or other synthetic elements / wrappings should be immediately removed or kept out of the reach of children.
Keep the assembly plan and the hex key for future disassembly or assembly.
Please note:
Use only original accessories and spare parts from the producer or from the providers.
Assembly instructions:
Please take into consideration that the parts should be assembled on an even, flat surface. Make sure that the article is not inclined.
In order to protect the article and the floor, we recommend using the packaging of the article as underlay during the assembly.
Maintenance:
Wipe with a clean, wet cloth. Also find details on www.pinolino.de.
What else you should know:
I
n producing our furniture and toys we only use materials, oils, varnishes and glazes that do not pose a health hazard and are
appropriate for children's furniture. As a result of the production process, new furniture can sometimes retain a specific odor. To
counter this harmless inconvenience we recommend repeated venting.
For service cases:
If, despite constant supervision of the production process, a flaw should turn up, please mark the respective part clearly in this
assembly plan.
Print the Customer Service contact form from our website, www.pinolino.de. Shortly describe the flaw or the problem.
Send the complete assembly plan, a copy of the receipt and the Customer Service contact form, which you have filled in, with the
specification of the serial number (it can be found on the packaging, on the assembly instructions and on the article), to our address
below.
1 x
HK
und
• and • et • y • e • en
2 x
VM 4/30
PLEASE READ CAREFULLY! -
KEEP FOR FUTURE REFERENCE
WITHOUT RECONSIGNMENT OF THIS ASSEMBLY PLAN AND OF THE RECEIPT,
POSSIBLE COMPLAINTS WILL NOT BE TAKEN INTO CONSIDERATION.
We wish you much joy with your Pinolino wardrobe.
Manufactured by:
Pinolino
Kinderträume GmbH
Sprakeler Str. 397
D-48159 Münster
Fax +49-(0)251-23929-88
service@pinolino.de
www.pinolino.de
3

Publicité

Table des Matières
loading

Table des Matières