Operating Defects / Trouble Shooting - Super Ego Maxijet 1200 Manuel

Trouble shooting
Problem
The pump stops
due to motor
heating
The pump does not
deliver any water
Low water flow rate
The pump will
not start
Malfunctioning/Trouble shooting
Cause
- Foreign bodies in pump.
- Clogged impeller.
- Excessive pumped liquid temperature
- No water in pump.
- Air trapped in suction pipe.
- Clogged foot valve.
- Excessive suction head.
- Foreign matter in pump.
- Flawed impeller.
- Power failure.
- Clogged impeller.
GB GB When its useful life is over, do not dipose or the machine into the domestic waste, When its useful life is over, do not dipose or the machine into the domestic waste,
please send it to auhorised places for recycling.
Solution
- Check and clean
- Wait for the pump to cool down
- Fill pump body with water
- Check tightness of suction pipe.
- Clean foot valve.
- Check and modify the suction head if
required.
- Clean the pump and the impeller.
- Send the pump to the Technical Assis-
tance Service.
- Remove foreign matter.
- Check protection breaker.
- Remove foreign matte.
7
GB