FLIR LOREX LNZ3522B Manuel D'utilisation page 16

5
Installation
To wall mount the camera:
1. Use the included Allen key to loosen the hex lock on the bottom of the wall
mounting bracket. Once loose, remove the back plate of the mounting
bracket.
2. Attach the flat side of the metal mounting plate to the underside of the wall
mounting bracket using the included hex bolts (3x). Tighten using the in-
cluded Allen key.
Align the cable gap in the metal mount-
ing plate with the cable notch on the
underside of the wall mounting bracket
to ensure a proper fit.
#LX400043; r. 2.0/40122/40365; en-US
CAUTION
10