Installation Instructions; Detector Features; Technical Data - Gewiss CHORUS GW 10 716 Instructions D'installation

INSTALLATION INSTRUCTIONS

The detector is fitted with an RF system for receiving signals transmitted by the sensors.
On the front there is a programming button, 3 indication LEDs and a buzzer for audible
signals. Output relay with hermetic contacts for solenoid valve control. (or other electric
supply e.g. a pump)

TECHNICAL DATA

• Power supply
• Power absorbed
• Audible alarm
• Output relay
• Operating temperature
• Ambient relative humidity +30÷90% without condensation
• Fixing
• Detector dimensions
STANDARDS REFERENCES
• EN 60065, EN 55014-1; EN 55014-2.
Water detector features
12V ac/dc +10/-15%
2VA
70 dB at 1 m piezoelectric audible warning for alarm
one switched contact 2NO/1NC, 5A(AC1)/3A(AC15) - 250V ac
from +5°C to +40°C
inset on Chorus support
2 Chorus modules
29
E
N
G
L
I
S
H