All manuals and user guides at all-guides.com
Installation
Installation
Preconditions
For operation of the cable modem the following
conditions need to be satisfied:
Broadband cable connection with backward
channel,
Network-compatible PC (Ethernet 10/100Base-T
or USB 1.1).
Connections
When connecting the cable modem, follow the
steps below in order, see wiring diagram on page
29.
• Connect the RF input (2) of the modem to the
• For the connection use a coaxial cable with F-
• The connecting cable must have CE confor-
•
Use a) the Ethernet or b) the USB connection.
a) Connect the 10/100Base-T Ethernet connec-
b) Read the readme file on the USB Driver CD-
Get in touch with your relevant cable network
24
antenna socket. Make certain beforehand that
the socket has backward channel capability,
e.g. Kathrein ESM 30.
type connector plugs.
mity and exhibit a shielding factor in compli-
ance with class A of >85 dB (e.g. Kathrein
ETG 15 / ETG 30).
Connect the power adapter to the D.C. volt-
age input (1) - DC IN 12 V - and to the mains
supply.
tions with one another.(Western socket) of
your PC and those of the cable modem (3).
ROM and make sure that your operating sys-
tem is supported. When installing the USB
connection (4) follow the instructions from the
Readme file.