Home Skinovations Silk'n BellaGlide Mode D'emploi page 5

Set the energy level
. 8 Apply the TREATMENT SURFACE to the skin, making sure the skin is spread evenly and smoothly. As
soon as the TREATMENT SURFACE is in full contact with the skin, the READY INDICATOR LIGHT
will start blinking.
. 9 Press the PULSE BUTTON. The device will first determine the color of your skin. If the color of the
skin is light enough for safe application, the device will flash a pulse of light onto your skin, and the
READY INDICATOR LIGHT will turn off. You will see a bright flash of light and simultaneously hear a
subtle pop sound, which is a normal noise for the device. You will feel a mild sensation of warmth and
tingling. Silk'n BellaFlash will immediately recharge for the next pulse.
10 Move the TREATMENT SURFACE to another area of skin avoiding gaps and overlaps between pulses. .
11 Repeat the process until the entire treatment area is covered. .
If your skin blisters or burns, stop use immediately.
2