Unify Circuit Guide D'installation Rapide page 5

Setting up the Circuit Meeting Room Software
Circuit Meeting Room requires completing software installation prior to operation:
• Google Chrome
• Circuit App
You will be guided by an installation wizard.
Circuit Meeting Room is configured using web pages ("Dashboard"). You can access
the Dashboard either by:
• Reading the Network IP address from the display and enter it in a web browser on
your computer in the same network:
or
• Connecting a USB keyboard and mouse to a USB connector
Your browser (and the display) shows the Dashboard landing page. After first login,
the installation wizard will start automatically.
NOTE: The installation requires connection to the network and access to the Internet.
Please check your network setup before (DHCP available, proxy configuration).
Using the Installation Wizard
1 Login to the Dashboard
Login to the Dashboard using the de-
fault administrator password:
Admin%123
The installation wizard starts.
3 Check internet connection
If you do not have an internet connec-
tion, click Cancel while the check is in
progress or OK afterwards to get to the
Network configuration page of the
Dashboard and edit the network set-
tings. After submitting the changes, the
installation wizard resumes.
5 Review Chrome EULA
Read and accept the End User License
Agreement (EULA) for the Google
Chrome Browser.
7 Chrome Installation
Click Install Chrome
1 Depending on your available network bandwidth, this may take a few moments.
Configuring your Circuit Meeting Room for First Use
Once your Circuit Meeting Room software installation is completed, the Dashboard
displays the Circuit configuration page. Follow the steps described below to register
your Circuit Meeting Room to Circuit.
1 Determine Device ID
Read the Device ID from the Circuit
Meeting Room display and provide this
to your Circuit Domain Administrator.
3 Enter the registration code
Enter the registration code you received
in the Circuit configuration page of the
Dashboard.
https://<ip-address>
1
.
2 Change password
Change the password for accessing the
Dashboard.
4 Review Device EULA
Read and accept the End User License
Agreement (EULA) for the pre-installed
Unify software.
6 Review Client EULA
Read and accept the End User License
Agreement (EULA) for the Circuit App.
8 WebApp Installation
Click Install Chrome Web App.
2 Get temporary registration
code
The Circuit Domain Administration pro-
vides you with a temporary registration
code.
4 Completing configuration
Circuit Meeting Room
displays its idle screen
with the following in-
formation:
• Name of the Circuit
Meeting Room
• IP address of the
Circuit Meeting
Room, in case re-
mote access
Dashboard is need-
ed
• PIN required for activation
• Short instructions on how to use the
Circuit Meeting Room
1 .
to
5