HIKVISION DS-7104NI-Q1 Guide De Démarrage Rapide page 5

Note:
● The power supplies list is for EU countries only.
● The power supplies list is subject to change without prior notice.
HDD Installation
Startup
Proper startup is crucial to expand the life of NVR/DVR.
Step 1 Plug power supply into an electrical outlet.
Step 2 Press the power button (certain models may have power button on the front or rear panel).
The device begins to start.
Activate Your Device
No operation is allowed before activation. For the first-time access, it requires to set an admin
password for device activation. You can also activate the device via web browser, SADP or client
software.
Step 1 Enter the same password in Create New Password and Confirm New Password.
Step 2 Optionally, set reserved email, Hik-Connect, security questions, or export GUID for password
resetting in the future.
Step 3 Set the password to activate the network camera(s) connected to the device.
Step 4 Click OK to save the password and activate the device.
4