Communication; Modem Auto-Answer; Vitesse De Communication Rs232 - Visonic AXS-100 Manuel De Programmation

Table des Matières

Publicité

5.7 Communication

5.7.1 Modem Auto-Answer.

Un modem connecté à la sortie RS 232 permet au VXS-100 de
communiquer avec un PC.
Un software tel que l'AXSalert peut ainsi appeler le contrôleur.
Pour permettre la communication, le contrôleur peut initialiser un
Modem afin qu'il décroche dès la première sonnerie.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits pour a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in residential installations. This equipment generates, uses and can radiate radio frequency energy and, si
not installed and used in accordance with the instructions, may cause harmful interference to radio and television reception. However, there is no guarantee that
interference will not occur in a particular installation. Si this device does cause such interference, which can be versiied by turning the device off and on, the user is
encouraged to eliminate the interference by one or more of the following measures:
– Re-orient or re-locate the receiving antenna.
– Increase the distance between the device and the receiver.
– Connect the device to an outlet on a circuit dsiferent from the one which supplies power to the receiver.
Consult the dealer or an experienced radio/TV technician.
WARNING! Changes or modsiications to this unit not expressly approved by the party responsible pour compliance could void the user's authority to operate the
equipment
WARRANTY
Visonic Ltd. and/or its subsidiaries and its affiliates ("the Manufacturer") warrants its
products hereinafter referred to as "the Product" or "Products" to be in conpourmance
with its own plans and specsiications and to be free of defects in materials and
workmanship under normal use and service pour a period of twelve months from the date
of shipment by the Manufacturer. The Manufacturer's obligations shall be limited within
the warranty period, at its option, to repair or replace the product or any part thereof. The
Manufacturer shall not be responsible pour dismantling and/or reinstallation charges. To
exercise the warranty the product must be returned to the Manufacturer freight prepaid
and insured.
This warranty does not apply in the following cases: improper installation, misuse,
failure to follow installation and operating instructions, alteration, abuse, accident or
tampering, and repair by anyone other than the Manufacturer.
This warranty is exclusive and expressly in lieu of all other warranties, obligations or
liabilities, whether written, oral, express or implied, including any warranty of
merchantability or fitness pour a particular purpose, or otherwise. In no case shall the
Manufacturer be liable to anyone pour any consequential or incidental damages pour
breach of this warranty or any other warranties whatsoever, as apouresaid.
This warranty shall not be modsiied, varied or extended, and the Manufacturer does not
authorize any person to act on its behalf in the modsiication, variation or extension of this
warranty. This warranty shall apply to the Product seulement. All products, accessories
or attachments of others used in conjunction with the Product, including batteries, shall
be covered solely by their own warranty, si any. The Manufacturer shall not be liable pour
any damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially
or otherwise, caused by the malfunction of the Product due to products, accessories, or
attachments of others, including batteries, used in conjunction with the Products.
Technical Dept.:
35 Hamelacha St. Carmiel 20100 ISRAEL Tel: 972 4 9081115 Fax: 972 4 9081116
Sales Dept.:
30 Habarzel St. Tel Aviv 69710 ISRAEL Tel: 972 3 645 6789 Fax: 972 3 645 6891
Visonic Inc. (U.S.A.):
10 NORTHWOOD DRIVE, BLOOMFIELD CT. 06002-1911. Tel: (860) 243-0833, (800) 223-0020 Fax: (860) 242-8094
VisAccess Ltd. (UK):
UNIT 1, STRATTON PARK, DUNTON LANE, BIGGLESWADE, BEDS. SG18 8QS. Tel: (01767)600857 Fax: (01767)601098
www.visaccess.com
In
ternet:
©VisAccess Ltd. 2000
VXS-100
DE6280U (REV. 1, 6/00)
DE6280U
Pour permettre cette option référez vous à la section 3.2.8.2 Flag
Set #2).

5.7.2 Vitesse de communication RS232.

Le port RS-232 du contrôleur peut être paramétré avec une de
ces vitesses : 1200,2400,4800,9600 bits/second.
La valeur par défaut est 9600 bits/second. Modifiez cette valeur
en vous référant à la section 3.2.8.2 Flag Set #2, flag #5.
The Manufacturer does not represent that its Product may not be compromised and/or
circumvented, or that the Product will prevent any death, personal and/or bodily injury
and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the
Product will in all cases provide adequate warning or protection. User understands that a
properly installed and maintained alarm may seulement reduce the risk of events such as
burglary, robbery, and fire without warning, but it is not insurance or a guarantee that
such will not occur or that there will be no death, personal damage and/or damage to
property as a result.
The Manufacturer shall have no liability pour any death, personal and/or bodily
injury and/or damage to property or other loss whether direct, indirect, incidental,
consequential or otherwise, based on a claim that the Product failed to function.
However, si the Manufacturer is held liable, whether directly or indirectly, pour any loss or
damage arising under this limited warranty or otherwise, regardless of cause or origin, the
Manufacturer's maximum liability shall not in any case exceed the purchase price of the
Product, which shall be fixed as liquidated damages and not as a penalty, and shall be
the complete and exclusive remedy against the Manufacturer.
Warning: The user should follow the installation and operation instructions and among
other things test the Product and the whole system at least once a week. Pour various
reasons, including, but not limited to, changes in environmental conditions, electric or
electronic disruptions and tampering, the Product may not perpourm as expected. The
user is advised to take all necessary precautions pour his/her safety and the protection of
his/her property.
E-mail: tech_support@visaccess.com
6/91
15

Publicité

Table des Matières
loading

Produits Connexes pour Visonic AXS-100

Table des Matières