Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
10. Connect the pipes.
11. Place the flue duct face down on the
cardboard packaging and screw the
operating device to the flue duct.
12. Carefully install the flue duct. Connect
to the power supply and check that the
extractor hood functions.
13. Press the cable for the operating device
into the clips on the flue duct and on
the extractor hood.
24
14. Insert the complete flue duct at an
angle into the glass shield and swivel
backwards.
2.
1.
15. Carefully pull the upper flue duct
upwards and screw the sides to the
fixing bracket with 2 screws.
16. Insert the grease filter (refer to
Operating Instructions).
Publicité
Table des Matières
