Gb: English Installation Manual For Control Omni Converter; Description; Wiring - Abilia Control Omni Converter Instructions De Montage

GB: English Installation manual for Control Omni
Converter

Description

Control Omni Converter is a voltage converter designed to be connected to
wheelchair batteries in order to charge Control Omni.

Wiring

1. Turn off the main power to the
wheelchair.
2. Mount the Control Omni Docking Station
if not already mounted.
3. Measure where the cable and Converter
are to be placed. Place the converter in
a protected location.
NB! Make sure there is enough cable to
reach when the wheelchair seat is
raised or lowered, and that the cable
does not get pinched between moving
parts.
4. Strap in place the cable from the Control Omni Docking Station all the
way down to the wheelchair batteries.
5. Connect the Control Omni
Converter to the battery
terminals.
Red connection = + 24V.
Black = Ground connection.
Positive
terminal
6
Docking
Station
Converter
GND