Installation Instructions; Notes On Installation - Dometic 8882040005 Mode D'emploi

Frigo
3

Installation instructions

The installation manual is intended to provide you with important instructions for the instal-
lation and can also be used as a source of reference if repairs are needed.
As the installer of the Frigo cooling system, the professional installation carried out by you
contributes significantly to both the essential operational safety and reliable performance of
the cooling system.
3.1

Notes on installation

This installation manual must be read completely prior to the installation of the Frigo cool-
ing system.
The following tips and guidance should be followed when installing the Frigo cooling
system:
!
WARNING!
Make sure that all electrical components are electrically discharged before
carrying out work on them!
z Before installing the cooling system, always check whether any vehicle components
could be damaged or have their function impaired as a result of the installation of the
electrical cooling system.
z The assembly parts supplied must not be modified during installation.
z The ventilation slots (grill, evaporator) may not be covered (minimum distance from
other attachment parts: 10 cm).
z For installation and repair work, adhere to the corresponding rules of technology.
z Observe the body manufacturer's guidelines with regard to the installation of the cool-
ing system and its electrical connection.
z Use appropriate tools for each step of the installation.
z Prior to and during drilling, note the location of existing cable harnesses, cables and
other components.
!
WARNING!
Disconnect the power supply on the vehicle battery before installing the cool-
ing system.
Non-observance can result in danger of electrocution!
!
CAUTION!
Improper installation of the cooling system can result in irreparable damage to
the device and put the safety of the user at risk!
The manufacturer assumes no liability for malfunctions and for the safety of the
Frigo cooling system, especially for personal injury and/or damage to prop-
erty, if the cooling system is not installed in accordance with these installation
instructions!
6
Installation instructions