Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fitting kit
- 2 steel washers Ø6 M type
Fitting instructions
- Remove the cover that surrounds the windshield : 2 Phillip screws under the air intake, and 2 BHc
screws on the sides.
- Remove the original windshield and then the upper fitting screws from the windshields fitting
brackets.
- Place a washer Ø6 between the bracket and its fixation and then screw the set : it changes slightly
the windshield inclination to prevent any friction between this one and the slide.
- Place and fit the Ermax windshield using the original screws.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Screens damaged by an inadequat washing are not guaranteed (abrasive, corrosive ... products, solvent, thinner, benzine ...). Wash immediately brake or battery fluid which may flow on accessories.
Screws to remove to insert the washer
(it must be placed under the fixation)
« CAUTION »
FITTIGN INSTRUCTIONS
ERMAX WINDSHIELD
ADAPTABLE ON FORZA 125 2015 → ∞
Publicité
