Vestfrost VKG 511 Mode D'emploi page 8

GB
Reversing the door for
appliance with 2 doors.
16. Retighten the top panel
all the way round. If it does not, carefully heat the strip all the way round using a hair dryer.
13. Fit the left-side top hinge (avail-
able as extra). Tighten the tosion
spring approx. 1/2 turn (anticlockwise bushing.
on left side, clockwise on rigth.)
screws using a screwdriver.
18. After reversing the door, it is important to check that the sealing strip provides a tight seal
Then ease the strip outwards slightly so that it forms a tight seal against the cabinet. Be care-
ful not to heat the strip so much that it melts!
● Dismount the middle hing pin and
● Dismount the door
● Cover for hinge hole is dismount-
ed an remounted in opposite site.
14. Secure the top hinge in
position.
lock pin.
8
17. Refit the lock housing and
15. Raise the appliance into
uppight possion. Click the top
panel into place (it is secured in
three places.)