How To Exchange The Pin Inside The Slider (Fig . E, F, G); Cleaning And Care - OWIM HG03031A Instructions D'utilisation Et Consignes De Sécurité

˜ How to exchange the pin inside the slider
(Fig. E, F, G)
Take out the slider
pin inside (Fig . F) .
10
You will need the pliers to carefully remove the old pin from the
slider (Fig . G) .
Insert the spare pin carefully into the slider by again using the
pliers . The new pin is installed .
˜ Cleaning and care
Clean the product on the outside only with a soft, wet and clean
cloth .
Rinse the product under the running water if necessary . Dry
thoroughly after rinse .
24 GB/IE
, open the bottom cover
9
with the spare
11