GRE ABS3 Manuel D'instructions page 3

EN
Electric Cleaner
Thank you for purchasing the spa/pool vacuum clea-
ner.
The spa/pool vacuum cleaner is a hand held battery
operated cleaner which is easy to use.
It saves water and reduces chemical consumption in
the cleaning process. It is suitable for most spa, and
above-ground pools.
Please note that the outlet hole of the lower body
(the right photo) must be submerged during ope-
ration to avoid damage to the pump. It is designed
to collect floor and seat debris – it is not a surface
skimming device.
8 AA sized batteries are not included in it.
1. Screw off the cap anticlockwise
from the top of handle.
4. Slide the handle cover back.
7. Place the motorized head (not
the handle) of cleaner into the
spa/pool and turn on the power
by pressing the button.
2. Pull the handle cover gently to
expose the battery compartment.
5. Screw the cap clockwise on the
top of handle.
DUAL-END
NOZZLE
SLIDE-ON
BRUSH
Cleaner comes with two nozzles
and one brush that have three
special uses. They are already
attached to the cleaner.
3. Place the 8 AA sized batteries
into allotted areas of battery
compartment correctly.
LOCK
6. Turn the ring in anti clockwi-
se until feel it stop, adjust the
length of alu pole you want,
then turn the ring in clockwise
to lock it.
WIDE-END
NOZZLE
Outlet hole
OPEN