Technical Description; Installing The Reversing Video Camera - Dometic PERFECTVIEW CAM 29N Instructions De Montage

CAM29N
6

Technical description

The CAM29N camera can be used for many different purposes, for example:
• As a reversing video camera for vehicles for installation in the bumper
• As a side camera in an HGV
• As entrance monitors in buses
• For hidden indoor surveillance.
The CAM29N reversing video camera is comprised of a camera and the mounting case for
optional installation.
The camera can be installed directly, for example in a bumper.
The power is connected using a cable ready to plug into the monitor.
7

Installing the reversing video camera

I
NOTE
If you do not have sufficient technical knowledge to install and connect the
components in vehicles, you should have a specialist install the reversing video
camera in your vehicle.
7.1 Installing the camera
Observe the following information when selecting an installation location for the camera:
• Note the length of the camera cable.
• If you wish to use the camera as a reversing video camera, installing the camera in the middle of
the bumper is recommended (fig. 4, page 4).
The installation location on the bumper should be perpendicular to the road surface to ensure
the camera is aligned horizontally.
The camera has a 90° horizontal field of view. Due to the field of view, the reversing video camera
can only detect objects near the corner of the vehicle to a limited extent.
The following section describes the procedure for installing the reversing video camera in the
bumper. You can also install the camera in other positions, depending on how you wish to use it.
I
NOTE
The installation sleeve provided (fig. 3 , 2, page 4) is not required for the installation
procedure described here.
➤ Select a suitable installation location.
A
NOTICE!
Before drilling any holes, ensure that no electrical cables or other parts of the vehicle
can be damaged by drilling, sawing and filing.
EN
Technical description
9