Quick Release Filter - Hayward KingShark2 DC Guide De L'utilisateur

THIS KINGSHARK FEATURES A NEW qUICK RELEASE FILTER SySTEM DESIGNED
TO REDUCE THE WEIGHT OF THE MACHINE FOR EASIER REMOVAL FROM THE
POOL.
1. WITH THE MACHINE SUBMERGED IN THE POOL AND SHUT DOWN USE THE
SUP PLIED POLE HOOK TO CATCH AND PULL THE yELLOW HANDLE ATTACHED
TO THE FILTER BACK PLATE. GENTLy PULLING UP ON THE HANDLE WILL
RELEASE THE RETAINING PIN.
2. PULL THE HANDLE AWAy FROM THE BACK OF THE MACHINE; THE FILTER
ASSEMBLy WILL SLIDE OUT OF THE MACHINE. USE THE HOOK TO BRING THE
FILTER TO THE POOL SURFACE.
3. SERVICE THE FILTERS PER THE OWNERS MANUAL
4. THE MACHINE MAy NOW BE LIFTED FROM THE POOL TO INSTALL THE FILTER
HOUSING BEFORE THE NExT USE
1. SLIDE THE qUICK RELEASE FILTER HOUSING ASSEMBLy INTO THE MACHINE.
2. INSERT THE qUICK RELEASE PIN THAT IS ATTACHED TO THE HANDLE CABLE
INTO PO SITION THROUGH THE PLASTIC BLOCK ON THE FRONT OF THE BACK
PLATE, IT WILL ENGAGE THE RETAINING STUD AND LOCK INTO POSITION.
3. THE MACHINE IS NOW READy FOR USE.

QUiCK releaSe Filter

inStrUCtiOn
SerViCinG tHe Filter aSSemBly
inStallinG tHe Filter aSSemBly
13